Home :: Changing the time on a Norstar system

Changing the time on a Norstar system

Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.
  1. To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
  2. Enter password (default = 266344) - display should read "Terminals & Sets"
  3. Press "NEXT" 5 times - display should read "Time and Date"
  4. Press "SHOW" - display should read "Hour:___"
  5. Press softkey "CHANGE"
  6. Enter hour - display should read "AM OK or Change"
  7. Select AM or PM
  8. Press "NEXT" - display should read "Minutes:___"
  9. Press softkey "CHANGE"
  10. Enter minutes
  11. Press "NEXT" - display should read "Year:___"
  12. Press softkey "CHANGE"
  13. Enter year
  14. Press "NEXT" - display should read "Month:___"
  15. Press softkey "CHANGE"
  16. Enter month
  17. Press "NEXT" - display should read "Day:___"
  18. Press softkey "CHANGE"
  19. Enter day
  20. Press "NEXT"

 

Programming template for M7208
 
Programming template for M7310
 
Print this page, cut out the middle areas with a utility knife and then cut around the outside box.  After you're done cutting, place the template over the top 2 rows on your M7310 or M7324 telephone or the 8 rows on your M7208 telephone.
 


 

Questions? Give us a call! 877.289.6678

MasterCard & American Express & Discover & Visa & PayPal & Google Checkout  RSS Headline RSS

Copyright 2004-2013 National Telecom