Phone System Nortel

Nortel Phone System

Toll Free: 877-289-6678

Norstar Modular ICS XC 7.0 software(2005)

Modular ICS XC software supports Nortel Companion Mobility, allowing customers to install up to 32 Base Stations and 60 portable telephones.
-Expand the system with a second 6 port expansion card. Provides expansion beyond 6
Expansion ports to a maximum of 12 all the six expansion ports are only used for station expansion no trunks allowed on these expansion ports.

The XC software comes in two flavors XC –USA, and XC-CDA
The only difference between the XC- USA and XC-Canadian version is the (UTAM) registration codes that required supporting the companion wireless on the USA version and nothing is required on the Canadian version, other than that all the features and the capability are the same.

UTAM Activation Code (U.S. only) activates the wireless capability on a new system and in system upgrades involving a change to the wireless number of Base Stations supported.
The Federal Communications Commission (FCC) has appointed UTAM (Unlicensed Transition and Management) Inc. as the body responsible for coordinating and verifying the installation or relocation of personal wireless communication devices operating between 1.92 GHz and 1.93 GHz. This allows UTAM Inc. to monitor and control the level of wireless activity within this band for a specified geographical location.
Note:
If you carry on an upgrade for an existing system with XC software you must use the upgrade tool or the upgrade software flash card (if its 4.0 or higher) with the same country release If its USA you must Use USA not the CDA and vise versa other wise all the program will be lost and the system ID will change as well.

USA — Modular ICS - XC 7.0 Software Feature Cartridge,
CDA — Modular ICS XC 7.0 Software Feature Cartridge.

 

Features
  • All features of Mics 7.0
     * Digital/analog telephone support on station modules installed in ports 13 and 14 on a mega system (MICS-XC software). In previous releases, these ports only supported Companion functionality. Each module supports 16 telephones.
     * An additional 32 target lines have been added to the core system for mega systems. The target line range for a Mega system is now 157-380.
Voicemail Capabilities:
  • Call pilot release 3 or higher
  • Startalk flash release 2.0 or higher
  • Norstar Application module (NAM) release 4.1
ACD application
  • Call pilot ACD release 3 or higher
  • Flash ACD release 2.0
  • ACD Minuet release 1.4
  • ACD Prelude, CinphonyI, Cinphony II Release 3.7 or higher
Norstar Remote Utilities (Remote programming options)
  • Norstar remote utility (NRU) release 11 or higher
Desktop application
  • CTA 100
  • CTA 150i (Discontinued)
  • CTA 160i
  • CTA 200
  • CTA 500M (Discontinued)
Hardware Compatibilities:
Modules:
  • Modular ICS Fiber Expansion two-port
  • Modular ICS Fiber Expansion six-port
  • Modular ICS Combination Fiber 6-Port
  • Services Cartridge
  • Digital Trunk Interface (T1/PRI)
  • LS/DS Analog Trunk Cartridge
  • Caller ID Trunk Cartridge
  • E&M/DISA Trunk Cartridge
  • DID Trunk Cartridge
  • ISDN-BRI 2 U Interface
  • ISDN-BRI 4 U Interface
  • ISDN-BRI 4 S/T Interface
     
Auxiliary Equipments:
  • Door phone and Door opener controller (DOC)
  • SMDR6
  • ATA 2
  • Fast RAD and fast RAD2 (Recommended if PRI is used)
  • VMI
  • Central Answering Position (CAP) module
  • Busy Lamp Field (BLF) Module (M7310 must be at least release 18 or higher in order to work correctly)
  • T24 KIM module
  • Polycom Audio conference unit (ACU)
  • Norstar VOIP Gateway unit
  • DS30 station port adapter
  • DMC (Digital mobility controller) 080/320
  • Digital mobility base station and Repeaters
Telephone sets:
  • M7100
  • M 7208
  • M7310
  • M7410
  • M7324
  • T7100
  • T7208
  • T7316
    (the first 6 button will not function as a line button only as a feature button)
  • T7316E
  • T7406
     
Digital Mobility phones
  • 7420
  • 7430
  • 7440