|
Key Features:
All features of DR 5
ATA answer timer
The last digit you dial on a device connected to an analog terminal
adaptor ATA and when the KSU is ready to receive DTMF tone from the far
end analog device. Up until now there was a fixed seven-second
distributing delay now you can shorten or lengthen the delay depending
on the requirements of the device
Attached to the Facsimile machines and credit card sets, for example,
require a three second delay.
Auxiliary Ringer
To resolve the problem of an auxiliary ringer indicating internally
transferred calls, the Auxiliary ringer can be set by line and by
telephone. The telephone setting when combined with the line
Setting allows you to choose if the Auxiliary Ringer (if installed) will
ring when a call is sent to a specific telephone or on a specific line.
For example, an incoming call on a line programmed to yes will ring the
auxiliary ringer. Once the calf answered and transferred within the
system, the auxiliary ringer will not ring a call sent to a telephone
that has auxiliary ringer set to
Do Not Disturb on Busy
When you are busy on a call and a second call comes in, your telephone
rings softly to alert you to the second call. If find this second ring
distracting, you can have the second call from you by assigning Do Not
Disturb (DND) on Busy to extension.
Last Number Redial
Up to now Last Number Redial was available for all telephones on a
system wide basis. Now you can change the ability of a particular
telephone to use Last Number Redial. This helps to ensure that only
authorized users can view access codes or passwords.
Link Feature
You can change a telephone’s ability to use Link (a host system’
Signaling option).
Page Tone
The tone’ preceding a Page Announcement up to now was always on. Now it
is possible to turn the Page tone off for all users. This is convenient
if the office environment is often busy with Page Announcements.
Page Timeout
You can now specify the amount of time required before a Page
Announcement session expires. Longer announcements can be completed
without having to re-page the other party.
Saved Number Redial
Up to now Saved Number Redial was available for all telephones on a
system wide basis. Now you can change the ability of a particular
telephone to use Saved Number Redial. This helps to ensure that only
authorized users can view access codes or passwords.
Voicemail Capabilities:
- Star talk (A, B, C) release 2.0. 4 L
- Star talk flash release 1.7 or higher
- Star talk Mini 2.5 or 2.6 (Not recommended
it’s not Y2K compliance)
- Norstar Application module (NAM) all releases.
ACD application:
- ACD Minuet release 1 or higher
- ACD Prelude, CinphonyI, Cinphony II Release 2
or higher
Norstar Remote Utilities (Remote programming
options)
- Norstar manager 3.5 or higher
- Norstar remote utility (NRU) release 5 or
higher
Desktop application
- CTA 100
- CTA 150i (Discontinued)
- CTA 160i
Hardware
Compatibilities:
Modules:
Auxiliary Equipments:
- Door
phone and Door opener controller (DOC)
- SMDR5
or higher
- ATA 2
- Fast
RAD and fast RAD2
- VMI
-
Central Answering Position (CAP) module
- Busy
Lamp Field (BLF) Module
-
Polycom Audio conference unit (ACU)
-
Norstar VOIP Gateway unit
- DS30
station port adapter
Telephone sets:
- M7100
- M
7208
- M7310
- M7410
- M7324
- T7100
- T7208
- T7316
(the first 6 button will not function as a line button only as a
feature button)
-
T7316E (the first 6 button will not function as a line button only
as a feature button)
- T7406
|
